ensemble complet emeteur/recepteur

YAESU FT-ONE
Dual VFOs- Dual Analog Meters-Keypad- Full CW Break-In- Built-in AC Power Supply-Notch Filter-Keypad-100 Watts Power- RF Attenuator-AGC (Slow/Fast/Off)-Active Audio Filter- Speech Processor-Variable Bandwidth-Carry Handle

JRC NRD 525
This multimode receiver tunes from 90 kHz to 34 MHz with a 10 Hz digital display. - Four independent filter positions are available with a 4 kHz and 2 kHz filter standard. Select stations via manual tuning, up-down tuning,
scanning, keypad entry or 200 channel memories. Advanced refinements include:
Passband Tuning, Notch Filter, Scan/Sweep, Clock Timer, effective Noise Blanker, Dimmer and Tone Control. The top panel features a built-in speaker. The rear panel has a selectable antenna input and timer relay contacts.

ICOM COMMUNICATION RECEIVER
ICR-7000
99 memories- 25-1000, 1025-2000MHz range - Scan rate 8cps (max) AM, WFM, FM, LSB, USB 100Hz; 1, 5, 10, 12.5, 25kHz steps
Priority scan Autostore (20 channels) voice squelch control (VSC) Analogue signal meter Noise blanker (NB) Attenuator Wireless remote control (optional) Tape recorder control Computer control

Yaesu FRT-7700
The Yaesu FRT-7700 Antenna Tuner covers the range of 150 kHz to 30 MHz in six bands. It features a variable gain control. The rear panel and has two antenna inputs. One for wire antennas and one for coaxial type antenna. There is a hardwired output cable to connect to the receiver. The FRT-7700 is a great match for the Yaesu FRG-7700.

The MFJ-949E deluxe 300 watt Versa Tuner II gives you full coverage from 1.8 to 30 MHz, a peak and average reading cross-needle SWR/power meter. It features a custom designed inductor switch,
1000 volt tuning capacitors, Teflon insulation washers and proper L/C ratio to ensure arc-free operation with up to 300 Watts 1.8 to 30 MHz. MFJ's Cross-Needle Meter shows you SWR, forward and reflected power simultaneously.
It reads both peak and average power on 300 or 30 watt ranges. MFJ's QRM-Free PreTune lets you pre-tune your MFJ-949E off-the-air into a built-in dummy load without causing QRM.
Pre-tuning into a dummy load makes tuning your actual antenna faster and easier. Outputs are provided for two coaxial cables and one random wire or balanced line

Acessoires cables, bafles...